A metal finish guide for business parts in Utah

Five rungs, from as received to polished, explained in plain words. Use it to pick a finish and to describe it so your request is clear the first time.

  1. As received
  2. Cleaned
  3. Ground
  4. Deburred
  5. Polished

Every metal part has a surface, and that surface does a job. It may need to hold paint, to keep hands safe, to look good at the front of a machine or to wipe clean in a busy kitchen. The trouble is that finish names are used loosely, and the same word can mean different things in different shops. This guide sets out the five rungs we use at Dozti Metal, from the way parts arrive to a bright polish, so we can talk about your parts in the same terms.

Each rung builds on the one below it. A good polish needs a well ground and deburred surface first; a good coating needs clean metal underneath. Choosing a rung is mostly about how the part is used and who will see it.

The five rungs, one by one

  1. 1. As received

    Looks like
    Dark blue-grey scale on hot-rolled steel, a dull skin on cut blanks, or the grime and old finish on a used part.
    Suits
    Hidden parts, or the starting point for everything else.
    What to tell us
    Tell us what the parts look like now, and send a photo if you can.
  2. 2. Cleaned

    Looks like
    Plain grey metal with a light, even scratch pattern. No scale, loose rust or flaking finish.
    Suits
    Parts going to paint or powder coat, or on to further finishing.
    What to tell us
    Say what coating comes next and whether your coater wants a light, medium or heavy profile.
  3. 3. Ground

    Looks like
    Straight abrasive lines across a flat, even face. Edges squared, high spots gone.
    Suits
    Frames, bases and parts that will be painted, or as a base for polishing.
    What to tell us
    Point out the faces to grind and anything that must not lose material.
  4. 4. Deburred and satin

    Looks like
    Softened edges, clean holes and a fine, even grain on the faces.
    Suits
    Parts people handle, parts in assemblies, enclosures and covers.
    What to tell us
    Describe the edge: burr removed only, a light break, or a small visible round.
  5. 5. Polished

    Looks like
    From bright satin up to a mirror with no visible lines.
    Suits
    Trim, hardware, decorative and display parts, signage blanks.
    What to tell us
    Say brushed, bright or mirror, or send a sample to match.

Finish by use

  • Parts that get painted or powder coated

    Cleaned or ground. A smooth polish does not help paint hold; a clean, slightly toothy surface does.

  • Parts that are handled all day

    Deburred with a satin or brushed face. Edges stay friendly and fingerprints do not show much.

  • Parts people look at

    Brushed for a calm, modern look, bright or mirror where you want the part to stand out.

  • Parts inside a machine

    Deburred is usually enough. Clean edges protect cables, seals and the hands of whoever services it.

Five steel sample coupons in a row on felt, from dark mill scale to mirror polished

Describing a finish without numbers

You do not need abrasive grades or roughness figures to ask for a finish. Plain words work: clean for coating, ground smooth, burr removed with a light edge break, brushed in one direction along the length, bright polish, mirror. If a figure matters for your part, put it on the drawing and we confirm it in the quote.

Matching an existing part

The surest way to get the finish you want is to send a part that already has it. We look at the direction and depth of the grain and the brightness, and match the new parts to it. On batches, the first finished piece comes to you so you can hold it next to your sample before the rest are done.

Keeping finished parts looking right

Bare cleaned or ground steel should go to paint or coating soon, because it picks up surface rust in moist air. Stainless, aluminum and polished parts are easier to keep. Wipe them with mild soapy water and a soft cloth, dry them, and follow the grain on brushed finishes. Keep finished parts apart in storage so faces do not rub, and avoid scouring pads and harsh cleaners.

What people ask about finishes

What is the difference between brushed and satin?

People use the words loosely. In our shop, brushed means a visible straight grain running one way, and satin means a softer, finer grain with a gentle sheen. When in doubt, send a sample or a photo.

Can you put a mirror finish on any part?

Most steel, stainless, aluminum and brass parts can be brought to a mirror, but shape matters. Deep inside corners and tight recesses are hard to reach with a wheel, so we tell you up front if a face can only reach a bright satin.

Why does stainless sometimes show rust spots after work elsewhere?

Usually because it picked up particles from carbon steel tools or abrasives. We keep separate abrasives for stainless to avoid that.

How do we clean finished parts?

Mild soapy water and a soft cloth, then dry. Wipe brushed finishes along the grain. Avoid scouring pads and harsh cleaners.

Know the rung you need?

Tell us the finish in your own words, or send a sample to match. You get our questions or a written quote back.